CONNECTION TO THE WALL BUSHINGS (WHITE PARTS IN ABS)
For the connection of the wall feed-throughs always start by stripping the inside of the white part and the PVC connection, either with a stripping agent or by lightly sanding with sandpaper. Coat both pieces with transparent glue, then press the two pieces together (by hand) and smooth the excess glue bead to ensure a perfect seal.
CONNECTION OF A BOTTOM DRAIN ON A HULL SWIMMING POOL.
This operation is always carried out before placing the pool in the hole. The bottom drain is installed using a high pressure PVC connector on the pool and a 90° elbow.
Strip and then coat the connector with glue and fit it onto the bottom drain which has already been fixed by the hull manufacturing plant. The bottom drain can be raised either using a rigid PVC 50 diameter or a semi-rigid PVC 50 diameter. Allow for a length of pipe of about two metres in order to raise the connection of the bottom drain at the level of the skimmer(s) and the searchlight.